46
Installation and Maintenance
Service Manual
3.8 Turbo Setting
Turbo function: The unit at the high fan speed can realize quick cooling or heating so that the room temperature can quickly approach the
setting value.
In the Cooling or Heating mode, press Function till the unit enters the Turbo setting status and then press Enter/Cancel to conrm the setting.
When the Turbo function is activated, press Function to enter the Turbo setting status and then press Enter/Cancel to cancel this function.
Turbo function setting is as shown in Fig.3.8.1.
Turn off the unit,without Sleep
function activated
Press Function repeatedly unitll
go to the Sleep setting status
Press Enter/Cancel to activated the Sleep
function
Press Enter/Cancel to cancel this
setting
Fig.3.7.1. Sleep Setting
Press Function repeatedly unitll go to the
Sleep function again
Turn off the unit,without Turbo
function activated
Press Function repeatedly unitll
go to the Turbo setting status
Press Enter/Cancel to activated the Turbo
function
Press Enter/Cancel to cancel this
setting
Fig.3.8.1 Turbo Setting
Press Function repeatedly unitll go to the
Turbo function again
To Next Page
Loading...
Need help?
General
