Gree HNTF24/A-D

37
Condensing Unit
Service Manual
4. Disassembly of motor
●Loosen the 2 screws of the motor attaching
clamp, remove the motor attaching clamp and
motor attaching clamp subassembly to remove
the motor.
Disassembly of right and left xing plates
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step Illustration Handling Instruction
Disassembly of right and left
xing plates
●Disassemble the bolts on right and left fixing
plates with tools. (As is shown by the arrow in
the graph.)