Usage and Installation Manual for Combination Heat Pump Water Heater
1.Usage notice
Dear users:
Thank you for choosing our Heat Pump Water Heater. Please read this manual carefully
before installation to install and use the unit correctly according to the following procedure.
Specially remind you meaning of the following marks:
Warning! Means incorrect operation may cause injuries and deaths or badly hurt.
！
Notice! Means incorrect operation may cause injuries or property loss.
！
Warning!
！
1、Only parts and components specified by our company can be used. Installation and technical
service should be performed by authorized dealers. Improper installation may cause water
leakage, electric shock, fire, and so on, so you yourself never repair the unit to avoid electric
shock, damage to controller and so on. Please contact with our company or dealer to repair the
unit.
2、Electric control cabinet must be installed firmly to avoid injury or damage to electric elements.
3.、The power must be supplied with specified wires which never can shared by other electric
appliances to avoid overload. Fuse or breaker must match with working voltage of unit.
4.、The unit must be reliably grounded. Never connect ground wire with neutral line, water pipe, gas
pipe, lightning conductor or ground wire of telephone to avoid electric shock. The ground wire
of unit and grounding electrode should be frequently checked to ensure its reliability.
5.、The unit is equipped with a leakage protector to ensure normal operation of the unit and an
additional electric heater with 9kW.If electric heater above 9kW is needed, appropriate leakage
protector should be selected according to local rules to avoid frequent leakage protection, fail
safe or electric shock.
6.、Never use or store flammable and explosive products near the unit.
7、Please cut off the power of the unit immediately when malfunction (such as burning odor is
smelled) occurs.
3
To Next Page
Loading...
