120
Disassembly of Outdoor Unit
36,000 btuh Warning - Wait 10 minutes aer power is disconnected before starting disassembly.
13. Remove vapor/liquid separator
Unsolder all joints connected with separator, then remove all
screws connecting separator and middle isolation sheet.
14. Remove middle isolation sheet
Remove the screws holding middle isolation sheet and chassis
then remove the isolation sheet.
15. Remove le side panel
Remove the screws holding the le side panel, chassis and middle
isolation sheet to remove panel.
16. Remove compressor
Remove the screws holding the compressor feet and chassis as
well as the cushions to remove the compressor. Prevent moisture
and debris from entering tubing.
17. Remove condenser
Remove the screws holding condenser and chassis, then remove
the condenser. Remove the screws holding the support plate, then
remove the support plate.
Vapor/liquid
separator
Middle isolation
sheet
Condenser
support
Le side panel
Condenser support
Condenser
Support plate
Compressor
To Next Page
Loading...