AIR-TO-WATER HEAT PUMP CONTROL
43
(2) Set weekly reservation
1) Press repeatedly button to select weekly reservation. The weekly
reservation icon
will display. The default operation model will flash.
2) Press button to select the operation mode of the weekly reservation (heating
mode
, cooling mode , sanitary heating mode , heating mode
+ sanitary heating mode
, cooling mode + sanitary heating mode ).
3) Press
button to save the operation mode of the weekly reservation and the
system will automatically enter setting target temperature mode of the weekly
reservation. The value that you want to set is flashing.
4) Press
button to adjust target temperature of the weekly reservation.
5) Press
button to save the target temperature of the weekly reservation and
the system will automatically enter selecting day of the weekly reservation. The day
selected is flashing.
6) Press
button to select one day of the weekly reservation.
7) Press
button to save the day of the weekly reservation and the system will
automatically enter the interface of adjusting hour of startup time in the first action of
this day.
8) Press
button to adjust hour of startup time in the first action of this day.
9) Press
button to save the hour of startup time in the first action of this day.
The system will automatically enter the interface of adjusting minute of startup time
in the first action of this day.
10) Press
button to adjust minute of startup time in the first action of this day.
11) Press
button to save the minute of startup time in the first action of this day.
The system will automatically enter adjusting hour mode of stop time in the first
To Next Page
Loading...
