Gree SXVD200LCJ2/A-M - Page 58

AIR-TO-WATER HEAT PUMP CONTROL
54
Step 2: Set timing temperature of the first period
1) The last timing temperature of the first period is defaulted. (The defaulted time is 8：
00 upon initial energization. If the reference point is indoor temperature, the defaulted
temperature is 20 for cooling and 26 for heating. If the reference point is outflow ℃℃
water temperature, the defaulted temperature is 18 for cooling and 40 for ℃℃
heating.) Press “▲” and “▼” button to adjust starting hour. Press “Set” to save the
adjustment;