Gree U-match Series

U-Match Series DC Inverter Service Manual
108
5. Assemble unit
Assemble the unit in the reverse
procedures of disassembly.
48/60k：
Disassembly and Assembly of external casing
Remark :
Step
Illustration
Handling Instruction
1. Remove external casing
1. Remove the top cover and handle;
2. Remove the grille, outer case and
right side plate.
2. Remove motor
1. Remove the blade nut and then
remove the blade;
2. Remove the motor from motor
support.
3.Remove gas liquid
separator.
1. Discharge the refrigerant inside the
pipeline and recycle the refrigerant
during discharging;
2. Unsolder the 4-way valve assy
from gas liquid separator;
3.Remove the gas liquid
separator.