Gree XK49

Wired Controller XK49
13
C07
View indoor
ambient
temperature
-
Operation method:
Enter viewing: press MODE button in “C07” status
to enter the interface of viewing indoor ambient
temperature. Press “ ” or “ ” button to select
indoor unit.
Display method:
Temperature zone: displays current indoor unit
project number;
The data display area:displays indoor ambient
temperature.
C08
View Filter Clean
Reminder time
4-416:
days
The data display area:displays Filter Clean
Reminder time.
Note: The filter-clean reminder function is not
available for this wired controller.
C09
View address of
wired controller
01, 02
The data display area : displays the address of
wired controller.
C11
View the indoor unit
quantity in the case
that one wired
controller controls
several indoor units
at the same time
1-16
The data display area : displays the indoor unit
quantity controlled by the wired controller.
C12
View outdoor
ambient
temperature
-
The data display area: displays outdoor ambient
temperature
C17
View indoor relative
humidity
20～90
relative
humidity20
%～90%
Operation method:
Enter into review process and press “MODE” button
to enter into the review interface of indoor relative
humidity under C17 status. Press “ ” or “ ”
button to switch the number of indoor unit.
Display method:
Temp area: display current indoor unit’s project
number
Timer zone: display indoor relative humidity