Gree XK75

Wired Controller XK75 Owner's Manual
10
saving.
Note:
①
.
This function is only available in cooling mode.
②
.
When this function has been set, set temperature is displayed in 27℃(81℉).
In this case, temperature setting and fan speed setting are shielded.
③
.
This function will be cancelled when turning off the unit or switching modes.
④
.
This function and sleep function cannot be on simultaneously. If I-demand
function is set firstly and then sleep function is set, I-demand function will be
cancelled while sleep function will be valid, and vice versa.
3.7.5 Absence Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select holiday
function option and press “
＜
” or “
＞
” button to turn on or turn off this function with auto
saving.
This function is used to maintain indoor temperature so that unit can realize fast
heating.
Note:
①
.
This function is only available in heating mode.
②
.
When this function has been set, set temperature is displayed in 8℃(46℉). In
this case, temperature setting and fan speed setting are shielded.
③
.
This function will be cancelled when switching modes.
④
.
This function and sleep function cannot be on simultaneously. If absence
function is set firstly and then sleep function is set, absence function will be
cancelled while sleep function will be valid, and vice versa.
3.7.6 Memory Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select memory
function and press “
＜
” or “
＞
” button to turn on or turn off memory function with auto
saving.
3.7.7 Save Function Setting
After entering user function page, press “
∧
” or “
∨
” button to select save function
and press “
＜
” or “
＞
” button to turn on or turn off save function. Press MENU button to
enter save function setting page.
After entering save function setting page, press “
＜
” or “
＞
” button to select cooling
or heating limitation temperature. After selecting cooling or heating limitation