It is possible to hot swap the drive if data copying is not in progress. DO NOT unplug the drive if data copying is in progress. Wait until the
process is completed and a notice to unplug the drive is displayed.
Why can I not copy a file larger than 4 GB to my USB drive from LiBackpack?
Please ensure that the USB flash drive is in the NTFS or exFAT format. The FAT32 format does not support files larger than 4 GB.
Why can’t I open the .ply file I transferred from the LiBackpack’s internal storage?
This indicates that the file is incomplete or corrupted, which is probably due to the disconnection of the flash drive before the data copying
process is completed. Please copy the complete data again.
To Next Page
Loading...