Greenwood Unity CV2GIP - General Overview

6 7
Controls
This section shows how to operate the Unity CV2GIP / CV2SVGIP
control panel.
Control Panel
3.0 Homeowner Controls
3.1.1
Bathroom
Trickle Mode
Greenwood
HumidiSMART
TM
On / Off
Kitchen
Boost Mode
Greenwood
TimerSMART
TM
On / Off
3.1.3
3.1.2
To View Fan Set Up / Status
Press any button to activate the panel. The current fan set up / status
will be shown via the green lights.
Example shows: Bathroom setting selected
Boost mode activated
Greenwood HumidiSMART
T
M
feature selected
Note: The Unity CV2GIP / CV2SVGIP is commissioned during
installation to provide the correct airflow requirements for your
dwelling. Post adjustment of the room setting or airflow speeds
is not available.