10 11
The Unity CV2GIP / CV2SVGIP contains a unique backward curved mixed
flow impellor that has been designed to reduce against any build up of
dirt. The fan motor has sealed for life bearings, which do not require
lubrication.
Periodic cleaning of the fans front cover and casing can be carried out
using a soft damp cloth. Care must be taken when wiping around the
control panel.
Warning: The Unity CV2GIP / CV2SVGIP must be isolated from the mains
supply before removing the electronics cover. Do not use solvents to
clean this fan.
Cleaning and user maintenance shall not be made by children without
supervision.
Please note that your stored fan settings will not be lost during any
interruptions to your fan’s power supply.
4.0 Servicing / Maintenance
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
Part 1 – System details and declarations
This section should be used to record all installation details. The
Commissioning Engineer should use the following Parts 1 to 3, to record
important information relating to the installation, of which, should be
incorporated into the Home Information Pack for the homeowner to keep.
• Part 1 – System details and declarations
• Part 2a – Installation details
• Part 2b – Inspection of installation
• Part 3 – Air flow measurement test and
commissioning details
5.0 Commissioning & Inspection Record
5.1.1
System 3 – Decentralised Mechanical
Extract Ventilation
Zehnder Group UK Limited
1.1 Installation Address Details
Dwelling Name/Number
Street
Locality
Town
County
Post Code
1.2 Installation Details
System Classification
Manufacturer
Model Number
Serial Number (where available)
Location of dMEV fans
To Next Page
Loading...
