Greenwood Unity CV2GIP - Change HumidiSMART Setting

14 15
2.4 Inspector’s Details
Name
Company
Address Line 1
Address Line 2
Telephone Number
Post Code Signature
Competent Person Scheme / Registration Number (if applicable)
Date of Inspection (completion)
Room
reference
(location of
terminals)
Kitchen
Bathroom
En Suite
Utility
Other…
Measured
Air Flow
High Rate
(l/s)
Measured
Air Flow
Low Rate
(l/s)
Design Air Flow
Low Rate (l/s)
Refer to
Table 5.1a in ADF
Design Air Flow
High Rate (l/s)
Refer to
Table 5.1a ADF
3.2 Air Flow Measurements
Part 3 – Air flow measurement test and commissioning details
3.1 Test Equipment
Schedule of air flow measurement equipment used,
(model and serial)
1.
Date of last UKAS calibration
3.4 Test Engineer’s Details
Name
Company
Address Line 1
Address Line 2
Telephone Number
Post Code
Signature
Competent Person Scheme /
Registration Number (if applicable)
Date of Test
3.3 Commissioning Tick as appropriate
Yes No
Have controls been set-up in accordance with
the manufacturer’s recommendations?