Why does my GreenWorks Pro CS60L00 Chainsaw not start?
If your GreenWorks Pro Chainsaw doesn't start, the battery might not be charged. Place the battery into the charger and allow charging up to 1 hour (2Ah) or 2 hours (4Ah).
What to do if my GreenWorks Pro CS60L00 motor runs, but the chain doesn't cut?
If the motor of your GreenWorks Pro Chainsaw runs, but the chain rotates without cutting, the chain might be dull. Sharpen the chain. Alternatively, the chain might be on backwards; reverse the direction of the chain.
Why is the bar and chain on my GreenWorks Pro CS60L00 Chainsaw running hot and smoking?
If the bar and chain on your GreenWorks Pro Chainsaw are running hot and smoking, it could be due to a couple of reasons. First, check the chain tension; it might be overtightened. Tension the chain. Second, the chain oil tank might be empty. Add bar and chain oil.
General| Bar Length | 16 inches |
|---|---|
| Motor | Brushless |
| Battery Voltage | 60V |
| Chain Type | Oregon |
| Power Source | Battery |
| Type | Chainsaw |
| Battery Capacity | 2.0 Ah |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inches |
Guidelines for safe operation in the work environment.
Precautions related to electrical hazards and battery usage.
Guidelines for operator safety and personal protection.
Safe handling and charging of the battery pack.
Guidelines for servicing the chainsaw.
Safety precautions regarding children in the work area.
Explanation of the chainsaw's built-in safety features.
Information on low-kickback chains and their performance.
Explains technical and recycling symbols.
Symbols related to safety alerts and personal protective equipment.
Symbols indicating operational warnings and hazards.
Identifies and describes the main parts of the chainsaw.
Instructions for unpacking the chainsaw and checking contents.
Procedure for filling the bar and chain oil tank.
Instructions for installing the battery pack into the chainsaw.
Steps to remove the battery from the chainsaw.
Detailed steps for starting and stopping the chainsaw.
How to engage and disengage the chain brake.
Guidance on proper grip and preparation before cutting.
How to maintain a stable stance and perform basic cutting.
How to remove buttress roots before felling.
Detailed steps for safely felling a tree.
How to perform the backcut during tree felling.
Instructions for cutting a fallen tree into desired log lengths.
How to buck logs that are under stress or tension.
Technique for cutting from the top of a log.
Technique for cutting from the underside of a log.
Removing branches from fallen and live trees.
Safety precautions for cutting springpoles.
Step-by-step guide for charging the battery pack.
Steps to troubleshoot battery charging issues.
Instructions for mounting the battery charger.
General cleaning and care instructions for the chainsaw.
Information on bearing lubrication for the unit.
Steps for fitting the chain and bar and initial tension adjustment.
Detailed procedure for adjusting the chain tension.
Step-by-step guide to sharpening the chain cutters.
Correct angles for filing the top plate of the cutters.
Correct angles for side plate and maintaining depth gauge.
How to maintain the guide bar for longevity and performance.
Troubleshooting for overheating, non-rotation, and starting problems.
Troubleshooting for cutting ability and chain direction problems.
Addressing issues related to the chain brake.
List of items and conditions not covered by the warranty.
Contact information for warranty service.
Details on who pays for transportation charges related to warranty.
To Next Page
