Need help?Do you have a question about the GreenWorks Pro CS60L02 and is the answer not in the manual?
General| Motor | Brushless |
|---|---|
| Voltage | 60V |
| Bar Length | 16 inches |
| Battery Compatibility | GreenWorks 60V batteries |
| Battery Type | Lithium-Ion |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 inch |
| Power Source | Battery |
| Battery Capacity | 2.0 Ah |
| Oil Tank Capacity | 200 ml |
| Chain Type | Oregon |
Defines the intended use of the chainsaw for cutting branches, logs, and beams.
Provides a diagram and labeled parts of the chainsaw for identification.
Guidelines for maintaining a clean, well-lit, and safe work environment.
Precautions to prevent electric shock, especially in wet conditions.
Advice on staying alert, using PPE, and preventing unintentional starting.
Instructions on proper tool usage, maintenance, and care to ensure safety.
Guidelines for safe handling, charging, and maintenance of battery packs.
Recommendation to use qualified personnel for tool servicing and replacement parts.
Step-by-step guide for safely unpacking the chainsaw and its components.
Instructions on how to properly fill the bar and chain oil reservoir.
Procedure for correctly inserting and securing the battery pack into the chainsaw.
Steps for safely detaching the battery pack from the chainsaw.
Instructions to check the chain oil level before operating the chainsaw.
Guidance on the correct hand grip and body positioning for safe operation.
Step-by-step instructions for safely starting the chainsaw.
Procedure for safely turning off the chainsaw.
How to correctly engage and disengage the chain brake for safety.
Detailed instructions and safety recommendations for felling trees.
Guidance on removing branches from a fallen tree safely.
Instructions for cutting logs into desired lengths.
Steps for removing and installing the guide bar and saw chain.
Procedure for correctly adjusting the chain tension for optimal performance.
Instructions on how to sharpen the chain cutters for efficient cutting.
Tips and procedures for maintaining the guide bar's condition.
To Next Page
