19
GENERAL MAINTENANCE
Keep your Electric Grass Trimmer clean and in good repair for maximum performance
and machine longevity. Before each use inspect the switch and cord for damage. Check
for damaged, missing, or worn parts. Check for loose screws, misalignment, moving
parts that are jammed, or any other conditions that may affect the operation. If
abnormal vibration or noise occurs, turn off the tool immediately and have the
problem corrected before further use. Do not use the Electric Grass Trimmer until it is
properly repaired or replaced.
Cleaning
Wipe the outside of the Electric Grass Trimmer with a dry soft cloth. Do not hose
down or wash the trimmer with water. Scrape the guard and spool area to remove
dried clippings and mud. Brush or blow dust, debris, and grass clippings out of the air
vents. Keep the vents free of obstruction.
Cutting Line
Replace the cutting line only with nylon monofilament line on pre-wound spools.
Always wind the line in the same direction as the arrow on the spool.
WARNING
ALWAYS TURN OFF THE TOOL AND UNPLUG THE POWER
CORD FROM THE OUTLET BEFORE MAINTAINING THE LAWN TRIMMER.
WARNING
TO AVOID INJURY, ELECTRIC SHOCK, OR DAMAGE TO THE
LAWN TRIMMER, NEVER IMMERSE THE LAWN TRIMMER IN LIQUID OR ALLOW
A LIQUID TO FLOW INSIDE THE TOOL.
WARNING
TO AVOID DAMAGE OR ELECTRIC SHOCK, DO NOT USE
STRONG SOLVENTS OR DETERGENTS ON THE PLASTIC HOUSING OR
PLASTIC COMPONENTS. CERTAIN HOUSEHOLD CLEANERS MAY DAMAGE
AND MAY ALSO CAUSE A SHOCK HAZARD.
Maintenance
To Next Page
