4
15.MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working
order.
16.CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, binding,
breakage, or any other conditions that may affect the tool’s operation. Any part that is
damaged should be properly repaired or replaced before use.
17.DO NOT operate tool if you are under the influence of any drugs, alcohol or
medication that could affect your ability to use the tool properly.
18.KEEP THE HANDLE DRY, CLEAN, AN
PROPOSITION 65
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
· lead from lead-based paints
· crystalline silica from bricks and cement and other masonry products
· arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
D FREE FROM OIL AND GREASE.
Always use a clean cloth when cleaning. Do not use solvents, brake fluids, gasoline,
or other petroleum products to clean the tool, they may damage plastic parts.
SAVE THESE SAFETY RULES
ALWAYS WEAR EYE PROTECTION.
An Electric Grass Trimmer can throw foreign objects into your eyes,
which could cause permanent eye damage. ALWAYS wear safety
goggles (not glasses). Ordinary eyeglases have only
impact-resistant lenses that comply with ANSI Z87.1.
General Safety Rules
To Next Page
Loading...
