SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper inter-pretation of these symbols will allow you to operate the product better and safer.
Frequency (cycles per second)
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits
etc., per minute
Double-insulated construction
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read
and understand operator’s manual before
using this product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injection or injury, never
direct a water stream towards people or pets or
place any body part in the stream. Leaking
hoses and fittings are also capable of causing
injection injury. Do not hold hoses or fittings.
To reduce the risk of injury from kickback, hold
the spray wand securely with both hands
when the machine is on.
Failure to use in dry conditions and to observe
safe practices can result in electric shock.
To Next Page
Loading...
