GreenWorks 51142 - KNOW YOUR PRESSURE WASHER; UNPACKING

2. Gun storage hook
8. Detergent tank
3. Handle assembly
1. On/Off switch
9. High pressure
hose
4. Electric cord storage hook
10. Spray wand
6. Wheels
5. Water intake
7. Electric cord hook
11. Gun
Fig. 2
KNOW YOUR PRESSURE WASHER
The safe use of this product requires an understanding of the information on the tool and in this
operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules. (See Figure 2.)
DETERGENT TANK
Remove the cap from the detergent tank to add detergent to the pressure washer.
GFCI PLUG
The pressure washer is equipped with a GFCI plug to guard against the hazards of ground fault
currents. This plug does not protect against short circuits, overloads, or shocks.
HIGH PRESSURE HOSE STORAGE
Once the high pressure hose is rolled, hang it on the top of the machine using the hook-and-loop
strap to secure in place.
ON / OFF SWITCH
This switch turns the pressure washer on and off.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides added control of the spray wand and
helps reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high pressure cleaning. The lock-out provides
protection against unauthorized use.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from the box. Make sure that all
items listed in the packing list are included.
11