8
ELECTRICAL
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power supply that
is 120 volts, 60 Hz, AC only (normal household current). Do not operate this product on direct
current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat.
DRIP LOOP
To prevent water from owing along the power cable, and possibly reaching the electrical outlet
and plug, we recommend using a simple drip loop as shown below.
WARNING
Keep the extension cord clear of the working area. Position the cord so that it will not get caught on
lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can
result in serious personal injury.
Fig. 1
Drip Loop
Power cord
To Next Page
Loading...
