GreenWorks MO80L06 - Slope Operation; Symbols on the Product

English
EN
7
• Clean the machine with a dry cloth. Do not use
water.
The recommended ambient temperature range:
Item
Temperature
Mower storage temperature
range
32°F (0°C) - 113°F
(45°C)
Mower operation temperature
range
32°F (0°C) - 113°F
(45°C)
Battery charging temperature
range
39°F (4°C) - 104°F
(40°C)
Charger operation tempera-
ture range
39°F (4°C) - 104°F
(40°C)
Battery storage temperature
range
32°F (0°C) - 113°F
(45°C)
Battery discharging tempera-
ture range
32°F (0°C) - 113°F
(45°C)
2.4 SLOPE OPERATION
Slopes are a major factor related to slip-and-fall
accidents, which can result in severe injury. Operation
on slopes requires extra caution. If you feel uneasy on
a slope, do not mow it.
Do:
• Mow across the face of slopes; never mow up
and down. Exercise extreme caution when changing
direction on slopes.
• Watch for holes, roots, rocks, hidden objects, or
bumps which can cause you to slip or trip. Tall grass
can hide obstacles. Remove all obstacles such as
rocks and tree limbs.
• Make sure that your footing is stable. If you are out
of balance, release the switch immediately.
Do not:
• Mow excessively steep slopes.
• Mow near drop-offs, ditches or embankments; you
could lose your footing or balance.
• Mow slopes greater than 15 degrees.
• Mow on wet grass. Unstable footing could cause
slipping.
3 SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
mower. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to
operate the mower better and safer.
Do not mow on the slopes with incline more than
15°. If you are not comfortable, do not mow on a
slope.
WARNING
In case of self-propelled mowers, please keep a low
self-propelled speed when you mow on a slope.
TIP
Sym-
bol
Name
Explanation
V
Volt
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per sec-
ond)
W
Watt
Power
min
Minutes
Time
/min
Per Minute
Revolutions, strokes, sur-
face speed, orbits etc., per
minute
Alternating
Current
Type of current
Direct Cur-
rent
Type or a characteristic of
current
n
o
No Load
Speed
Rotational speed, at no
load
Safety Alert
Precautions that involve
your safety.
Eye Protec-
tion
Always wear eye protection
with side shields marked
to comply with ANSI Z87.1
when operating this equip-
ment.
WARNING
--- Wet Con-
ditions
Do not expose the product
to rain or moist conditions.
Read Opera-
tor’s Manual
To reduce the risk of in-
jury, user must read and
understand operator’s man-
ual before using this prod-
uct.
Maintain
Safety Devi-
ces
Do not open or remove
safety devices while the
tool is running.