16
STARTING AND STOPPING THE TRIMMER
(See
Figure 3.
)
• Route the extension cord through the slot located on the rear of the string trimmer housing
and place underneath the cord retainer.
• Attach the outlet end of an extension cord to the plug on the rear of the string trimmer.
NOTE:
Use only approved outdoor extension cords.
NOTICE
Always use cord retainer to properly attach extension cord to string trimmer. Failure to use cord
retainer may result in damage to string trimmer and/or extension cord.
• To start the string trimmer, press the switch trigger.
• To stop the string trimmer, release the switch trigger.
OPERATION
Fig. 3
SWITCH TRIGGER
ATTACH OUTLET END
OF EXTENSION CORD
HERE
OUTLET END
CORD WRAP
To Next Page
Loading...
