5
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V
Volts Voltage
A
Amperes Current
Hz
Hertz Frequency (cycles per second)
W
Watts Power
min
Minutes Time
/min Per Minute
Revolutions, strokes, surface speed, orbits
etc., per minute.
Alternating Current Type of current
Class II Construction Double-insulated construction
No Blade
Do not install or use any type of blade on a
product or displaying this symbol.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using
this product.
Eye Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 when
operating this equipment.
Safety Alert Precautions that involve your safety.
Ricochet
Thrown objects can ricochet and result in
personal injury or property damage.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Wet Conditions Alert Do not expose to rain or use in damp locations.
SYMBOLS
To Next Page
Loading...
