GreenWorks STA806 User Manual (English)

Questions and Answers:

T
Terri WalkerAug 11, 2025
Why GreenWorks STA806 Trimmer won't start when I push the trigger?
- T
  Thomas KimAug 11, 2025
  Your GreenWorks Trimmer might not start due to several reasons: * There might be a poor electrical contact between the battery pack and the machine. To solve this, remove the battery pack, check the contact points, and then re-install the battery pack. * The battery pack could be depleted. If this is the case, charge the battery pack. * The lock-out button and trigger might not have been pushed simultaneously. To start the trimmer, pull and hold the lock-out button, then pull the trigger.
K
Kristin McbrideAug 17, 2025
What to do if the GreenWorks STA806 Trimmer line keeps breaking?
- J
  Jessica GonzalezAug 17, 2025
  If the line on your GreenWorks Trimmer keeps breaking, it could be due to incorrect usage. Make sure to cut with the tip of the line and avoid contact with stones, walls, and other hard objects. Also, advance the cutting line regularly to maintain the correct cutting width.
M
Mrs. Sierra Gray MDAug 22, 2025
Why does my GreenWorks Trimmer vibration increase?
- C
  Colin JohnsonAug 23, 2025
  Increased vibration in your GreenWorks Trimmer may occur because the line is worn down on one side and hasn't been advanced in time. Ensure the line on both sides is normal and advance the line as needed.
A
Angelica ChapmanAug 28, 2025
How to prevent grass from winding around the GreenWorks Trimmer head?
- J
  jason03Aug 29, 2025
  To prevent grass from winding around the trimmer head and motor housing of your GreenWorks Trimmer: * Cut tall grass from the top down. * Remove no more than 8" in each pass to prevent wrapping.
B
bwongSep 4, 2025
What to do if GreenWorks STA806 Trimmer line does not cut well?
- K
  Kyle ColemanSep 4, 2025
  If the line on your GreenWorks Trimmer isn't cutting well, the cut-off blade may have become dull. Sharpen the cut-off blade with a file or replace it.