Need help?Do you have a question about the GREMSY T3 and is the answer not in the manual?
General| Weight | 1.2 kg |
|---|---|
| Angular Vibration Range | ± 0.02° |
| Material | Aluminum |
| Payload Capacity | 1.7 kg |
| Control Interface | CAN |
| Pan Range | 360° continuous |
| Operating Temperature | -20°C to 50°C |
Overview of T3 features including HDMI quick release, I/O design, and advanced capabilities.
Technical specifications, mechanical parts identification, and I/O connector details.
What's in the box, quick release, powering on, status LEDs, and operation modes.
Installing software, USB, and Bluetooth connection procedures.
Steps for mounting the camera and balancing all gimbal axes for optimal performance.
Adjusting stiffness, using auto-tune, and configuring filters for optimal performance.
Expert settings, follow mode, rotation limits, and IMU sensor calibration.
Configuring control modes and connecting SBUS/PPM and JR/Spektrum receivers.
Step-by-step guide for updating the gimbal firmware via USB.
Solutions for status LED issues, oscillation, weak motors, and wobbling footage.
To Next Page