TROUBLESHOOTING 57
Gyro sensor is drifting too much
Stiffness is too low
Auto-power adjustment is not
enabled
Camera is not properly balanced
Stiffness setting is low
Re-calibrate gyro
Increase stiffness
Check in Expert menu if Auto-power
adjustment is enabled or not
Check camera balance
Increase stiffness settings, start with the
axis which is poorly stabilized. Higher
Stiffness will achieve better stabilization.
The tuning process is described in the user
manual.
Gremsy gimbal seems to be
drifting
Motors seem to be weak
Footage appears to wobble side
to side or up and down
To Previous Page
Loading...