Page 10
OCF 5.0 Open Channel Flow Monitor
PASSWORD
The Password (a number from 0000 to 9999) prevents unauthorized access to
the Calibration menu.
From the Main display press to get to Password. Factory default password is
0000 and if it has not been changed press the to proceed to the Menu
Selections screen.
If a password is required, press to place the cursor under the first digit and or
to set the number, then to the second digit, etc. Press or to proceed to
the Menu Selections screen.
A new password can be stored by going to Special Functions/New Password.
To Next Page
Loading...
