Assembly Instructions
1
Pull out the cart frame to the highest position,and hand tighten the butterfly nut after pushing
down the track bracket.
Follow the same on 4 sides.
Install Tank Holders and Casters
7
With an assistant, lift Cart out of shipping carton and place it on the cardboard work surface.
1/4"x1/2" Phillips Head Screw
QTY. 16
2
Assemble Cart
"
FRONT" Label
Push down the track bracket
Install Casters to each Cart Leg.(Tighten securely using 16 of 1/4"x1/2" Phillips Head Screws).
To Next Page
Loading...
