î
- 7 -
Connecting machine to power source:
Connect the machine to a power source as illustrated. (1)
Attention:
Unplug power cord when machine is not in use.
Foot control:
Connect the plug of the foot control to the connecting socket (A) of the sewing
machine and to the wall socket. The sewing speed is regulated by pressing the foot
control.Make sure that you have the right type of foot control.
Attention:
- For this sewing maschine foot control model HKT72C or FL3902 must be
used.
- If you have problem with plug connection, give support from a qualified
electrician.
Sewing light:
Your sewing machine is equipped with low consumption & long lifetime LED lamp.
Note:
There is no need to replace the LED lamp by yourself, If any problem occur with
this lamp, you should not use the sewing machine anymore and send it to the
nearest dealer or service center to repair & replace lamp quickly.
1
2
To Next Page
Loading...
Need help?
General
