Grizzly G0441 Instruction Manual

2. Use a razor or putty knife to cut the silicone
around the filter intake port.
3. Cut the silicone around the black box.
4. Unfasten the screws under the black box,
and pry off the box plate.
5. Separate the intake port from the black box,
and completely clean off all remaining sili
-
cone.
6. Pull or cut off the existing handle covers,
loosen the screw above the handles, and
remove the handles from the cable.
7. Unfasten the bolt at the top of the filter.

Grizzly G0441 Specifications

General

Brand	Grizzly
Model	G0441
Category	Dust Collector
Language	English