Grizzly G0441 Instruction Manual

8. Unfasten the bolt at the bottom of the filter.
9. Remove the original brush handle holder.
11. Unfasten the screws at the bottom of the fil-
ter.
12. Remove the original brush.
13. Unfasten the screws from the original brush,
and throw away the old cable. (A new cable
is provided in the kit.)
10. Install the handle holder so it is directly below
the black box and about three squares from
the bottom of the filter.

Grizzly G0441 Specifications

General

Brand	Grizzly
Model	G0441
Category	Dust Collector
Language	English