Grizzly G0547 User Manual

G0547 Combo Sander -9-
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
DESCRIPTION Qty
A. Sander Unit (Not Shown) . . . . . . . . . . . .1
B. Disc Sanding Table . . . . . . . . . . . . . . . . .1
C. Sanding Disc . . . . . . . . . . . . . . . . . . . . .1
D. Sanding Belt (Not Shown) . . . . . . . . . . . .1
E. Table Support . . . . . . . . . . . . . . . . . . . . .1
F. Disc Guard . . . . . . . . . . . . . . . . . . . . . . .1
G. Back Stop . . . . . . . . . . . . . . . . . . . . . . . .1
H. Miter Gauge . . . . . . . . . . . . . . . . . . . . . .1
I. Hardware Bag
• Switch Key . . . . . . . . . . . . . . . . . . . . . .1
• Knob . . . . . . . . . . . . . . . . . . . . . . . . . . .1
• Washer 6mm . . . . . . . . . . . . . . . . . . . .5
• Lock Washer 6mm . . . . . . . . . . . . . . . .4
• Hex Head Bolt M6-1.0 x 14 . . . . . . . . . .4
• Self Tapping Screw M4 x 8 . . . . . . . . . .2
Figure 3. G0547 inventory.
Sharp edges on metal
parts may cause person-
al injury. Examine the
edges of all metal parts
before handling.
B
E
C
F
H
G
I
Parts InventoryUnpacking
SECTION 5: SET UP
The machine was carefully packed when it left the
Grizzly warehouse. If you discover the machine is
damaged after you have signed for delivery, and
the truck and driver are gone, you will need to file
a freight claim with the carrier. Save the contain-
ers and all packing materials for possible inspec-
tion by the carrier or its agent. Without the pack-
ing materials, filing a freight claim can be difficult.
If you need assistance determining whether you
need to file a freight claim, or with the procedure
to file one, please contact our Customer Service.

Grizzly G0547 Specifications

General

Brand	Grizzly
Model	G0547
Category	Sander
Language	English