To Next Page

To Previous Page





The information contained herein is deemed accurate as of 9/14/2010 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 3Model G0652

Motors:

Main

Type.................................................................................................................. TEFC Capacitor Start Induction

Horsepower.................................................................................................................................................5 HP

Voltage.............................................................................................................................................. 220V/440V

Prewired......................................................................................................................................................220V

Phase.........................................................................................................................................................Three

Amps..........................................................................................................................................................12/6A

Speed.................................................................................................................................................3450 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ................................................................................................................................... Belt Drive

Bearings........................................................................................................ Sealed & Permanently Lubricated

Main Specifications:

Blade Information

Maximum Blade Diameter.......................................................................................................................... 10 in.

Riving Knife/Spreader Thickness..............................................................................................0.09 in. (2.3mm)

Required Blade Body Thickness............................................................................ 0.074-0.082 in. (1.9-2.1mm)

Required Blade Kerf Thickness.............................................................................. 0.114-0.122 in. (2.9-3.1mm)

Maximum Width Of Dado.......................................................................................................................... 3/4 in.

Blade Tilt....................................................................................................................................... Left 0-45 deg.

Arbor Size..................................................................................................................................................5/8 in.

Arbor Speed....................................................................................................................................... 4000 RPM

Arbor Bearings........................................................................................... Sealed and Permenantly Lubricated

Cutting Capacities

Maximum Depth Of Cut At 90 Degrees................................................................................................3-3/16 in.

Maximum Depth Of Cut At 45 Degrees................................................................................................2-3/16 in.

Maximum Rip To Right Of Blade-Standard................................................................................................ 52 in.

Maximum Rip To Left Of Blade.................................................................................................................. 18 in.

Table Information

Floor To Table Height.......................................................................................................................... 34-7/8 in.

Table Size Width.................................................................................................................................. 21-1/4 in.

Table Size Depth........................................................................................................................................27 in.

Table Size Thickness............................................................................................................................. 1-1/2 in.

Table Size With Extension Wings Width.............................................................................................. 75-3/4 in.

Table Size With Extension Wings Depth....................................................................................................27 in.

Table Size With Extension Wings Thickness......................................................................................... 1-1/2 in.

Distance Front Of Table To Center Of Blade....................................................................................... 14-7/8 in.

Distance Front Of Table to Blade At Maximum Cut........................................................................... 10-5/16 in.

Extension Table Size Width................................................................................................................. 42-1/2 in.

Extension Table Size Depth....................................................................................................................... 27 in.

Extension Table Size Thickness............................................................................................................... 3/4 in.

Fence Information

Fence Type...................................................................Single Lever, Front Locking, Aluminum Extruded Body

Fence Size Length............................................................................................................................... 40-1/4 in.

Fence Size Width................................................................................................................................... 4-1/8 in.

Fence Size Height..................................................................................................................................2-1/2 in.

Fence Rail Type.......................................................................................................................... Square Tubing

Fence Rail Length................................................................................................................................ 40-1/4 in.

Fence Rail Width....................................................................................................................................... 5/8 in.

Fence Rail Height...................................................................................................................................2-1/2 in.

