To Next PageTo Next Page
Need help?Do you have a question about the Grizzly T25937 and is the answer not in the manual?
General| Model | T25937 |
|---|---|
| Type | Belt/Disc Sander |
| Disc Speed | 3450 RPM |
| Motor | 1/3 HP |
| Voltage | 120V |
| Disc Diameter | 6 in. |
Critical safety instructions, owner's manual review, and operator qualifications.
Information on dust hazards and recommended protective measures.
Explains manual accuracy, potential machine differences, and update procedures.
Provides Grizzly Technical Support and Documentation contact details.
Details specifications like gear ratio, dimensions, and weight.
Describes controls like backlash adjustment, vernier, and degree scales.
Explains tailstock parts such as dead center, adjustment knob, and body.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Covers electrical safety, operator training, environment, and mental alertness.
Guides on inspecting contents, saving packaging, and checking for damage.
Lists necessary tools and included hardware for machine setup.
Provides a basic understanding of machine operation and controls.
Details how to rotate the table using the handwheel and lock it.
Step-by-step guide for mounting the rotary table horizontally to the mill.
Techniques for aligning workpieces with the mill spindle horizontally.
Process for creating evenly spaced holes using angular indexing.
Guide on how to install and use dividing plates for precise divisions.
Recommended daily and monthly maintenance tasks for optimal performance.
Instructions for lubricating ball oilers using appropriate methods and oil.
Guidelines for cleaning and protecting the rotary table surfaces to prevent corrosion.
Visual diagram and list of all parts for the rotary table model.
