To Next PageTo Next Page
Need help?Do you have a question about the Grizzly G0768 and is the answer not in the manual?
General| Brand | Grizzly |
|---|---|
| Model | G0768 |
| Category | Power Tool |
| Language | English |
Describes features of Model G0768 and G0769 lathes.
Provides contact details for Grizzly Technical Support and Documentation Manager.
Details controls and features of the lathe headstock.
Details controls and features of the lathe carriage.
Details controls and features of the lathe tailstock.
Details controls and features specific to the G0769 milling headstock.
Provides general safety guidelines for operating machinery.
Specific safety precautions for operating metal lathes.
Specific safety precautions for operating mills and drills.
Specifies the necessary voltage, cycle, phase, and amperage for the power circuit.
Details the importance and method of grounding the machine and proper plug usage.
Outlines the basic steps for setting up the machine for first-time operation.
Instructions on how to unpack the machine and inspect for shipping damage.
Lists all components shipped with the machine for inventory.
Covers placing the machine near a power source and protecting cords.
Procedure for breaking in the lathe spindle bearings.
Procedure for breaking in the mill spindle bearings on the G0769.
Provides a basic understanding of how to operate the lathe.
Steps for installing a chuck onto the lathe spindle.
Details the tailstock's function and operation.
Ensures accurate turning by aligning tailstock to spindle centerline.
Information about dead centers and their proper usage.
Instructions for installing and using the steady rest.
Guidance on selecting and setting correct spindle speeds for operations.
Provides a basic understanding of milling operations.
Describes how to adjust the headstock's vertical and tilt positions.
Explains the use of coarse and fine downfeed controls for milling.
Provides a schedule for ongoing, daily, and periodic maintenance tasks.
Detailed instructions for lubricating various machine components.
Provides solutions for common machine problems and symptoms.
Instructions for adjusting and replacing the machine's V-belts.
Guidance on adjusting gibs to achieve proper slide movement.
Essential safety precautions when working with machine wiring.
Overview of the electrical components and their locations for the G0768.
Overview of the electrical components and their locations for the G0769.
Lists part numbers and descriptions for the headstock assembly.
Lists part numbers and descriptions for carriage components and accessories.
Lists part numbers and descriptions for the gearbox assembly.
Lists part numbers and descriptions for the tailstock assembly.
Provides charts for setting up end gears for threading and feeding.
Chart indicating thread dial positions for various TPI.
