Saber Hand Wind Audio Player - User Guide
• option to delete existing contents from the Saber before copying,
• checking the total size prior to copying, and reserving space for the playlist
• copying to multiple Sabers or other removable drives at the same time.
Read the SaberCopy User Guide for more information. The latest version of SaberCopy is available
on the GRN website at http://globalrecordings.net/saber
4.4.2 Transferring files from computer
Follow this procedure to copy files onto the Saber.
1) Turn the player off (before connection is made to the computer)
2) On the computer start Windows Explorer and view “My Computer”. Identify the existing
drives on the computer.
3) Connect the player to the computer using a 5 pin Mini B USB cable.
* If the USB security firmware has been installed on the player, please refer to security
documentation for advice on the connection to the computer.
4) About 5 to 50 seconds after the USB connection is made, 2 new removable disk drives will
appear in the “My Computer” window (and in SaberCopy if this is running). The first of
these new drives will be the internal onboard memory inside the player. The second drive
will be the SD Card on the Saber player.
5) Use SaberCopy or a manual procedure to remove existing content and/or copy new files to
the onboard memory and/or any attached SD card.
6) When completed, disconnect the USB cable from the player and computer.
7) Turn on the player, and confirm that the audio files play as expected.
Page 12 of 15
To Next Page
Loading...
