Saber Hand Wind Audio Player - User Guide
1. Introduction
The Saber player is an MP3/WMA player with amplifier and speaker. The internal battery can be
recharged by turning the handle, or by plugging in an external power source such as a solar panel or
power pack. The player is operated from the keypad.
The Saber's on board memory contains documentation and software relating to various aspects of
the player's operation. Connect the Saber to a computer using a USB cable to view the documents
and run the utility setup program.
This User Guide describes how to operate the player, how to use the various power options, and
what to consider when loading new material onto the player.
1.1 Before You Start
It is recommended that the Saber be fully charged prior to first use.
1.2 Other information available
• Introduction to the Saber card
• SaberCopy Instructions
• Saber Maintenance Guide
The latest versions of all documents and software can be downloaded from
http://globalrecordings.net/saber.
1.3 Contact Details
Postal Address: Global Recordings Network Australia
Locked Bag 9019
Castle Hill NSW 1765
Australia
Phone: +61 2 9899 2211
Email: saber@globalrecordings.net
Page 3 of 15
To Next Page
Loading...
