4 OM-BPM/BPP-G
Groen gas-heated Tilting Braising Pans provide a stainless steel pan equipped with
patented heat transfer fins, burner/combustion chamber, hand-operated or electric
powered tilting mechanism, electronic ignition, electronic controls, and hinged cover.
The appliance serves as braising pan, griddle, fry pan, oven, kettle, bainmarie and
food warmer/server, can be adapted for use as a non-pressure steamer and can be
used to stir-fry, reheat and saute foods.
The pan body is made from heavy-duty stainless steel welded into one solid piece,
with a polished interior and exterior. A pouring lip is welded to the front wall. The
cooking surface is a stainless steel clad plate fitted with welded heat transfer
fins which assure uniform heat transfer over the entire surface. The gas burner/
combustion chamber supplies the heat.
An easily operated worm and gear mechanism tilts the pan and provides precise
control for pouring or dumping the contents of the pan. This hand-wheel controlled
mechanism is located in a stainless steel console to the right of the pan body. For
models with electric power tilt, a switch operates an electric motor that starts and
stops the pan tilt smoothly. To assist cleaning, the pan body can be tilted past the
vertical position. When the pan is tilted, the burners shut off automatically.
The electronic control provides automatic control of cooking temperature. Operating
the temperature dial on the front of the control console sets the pan temperature.
A heavy gauge, one-piece, stainless steel cover with a condensate drip shield on
the rear edge is standard on the Braising Pan. A fully enclosed, torsion bar type
counterbalance provides easy operation to open the cover and to maintain it open at
any position. The cover opens to the back and is hinged to the frame, so it moves
independently of the pan body.
The braising pan is mounted on an open-leg frame fabricated from tubular stainless steel.
Equipment Description
Model
PAN DIMENSIONS
Ignition Tilt
Left to Right Front to Rear Depth
BPM-15G,-15GC,
-15GA
18-1/8 (460 mm) " 28-1/4 (718 mm) " 8 (203 mm) " Elec. Spark Manual
BPM-15GS 18-1/8 (460 mm) " 28-1/4 (718 mm) " 8 (203 mm) " Standing Pilot Manual
BPM-30G,-30GC,
-30GA
26-1/4 (667 mm) " 28-1/4 (718 mm) " 10 (254 mm) " Elec. Spark Manual
BPP-30G,-30GC,
-30GA
26-1/4 (667 mm) " 28-1/4 (718 mm) " 10 (254 mm) " Elec. Spark Power
BPM-30GS 26-1/4 (667 mm) " 28-1/4 (718 mm) " 10 (254 mm) " Standing Pilot Manual
BPM-40G,-40GC,
-40GA
35-3/4 (908 mm) " 28-1/4 (718 mm) " 10 (254 mm) " Elec. Spark Manual
BPP-40G,-40GC,
-40GA
35-3/4 (908 mm) " 28-1/4 (718 mm) " 10 (254 mm) " Elec. Spark Power
BPM-40GS 35-3/4 (908 mm) " 28-1/4 (718 mm) " 10 (254 mm) " Standing Pilot Manual
To Next Page
Loading...
Need help?
General
