EasyManua.ls Logo

Groen Eclipse BPM-40G - User Manual

Groen Eclipse BPM-40G
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
This manual provides information for:
MODELS
BPM-30/40G(CE) International
ECLIPSE
ERGONOMIC
TILTING BRAISING PAN
· Stainless Steel
· Manual Tilt
· Gas Heated
OPERATOR/SERVICE MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
PART NUMBER 160812, REV. C (06/07)
1055 Mendell Davis Drive
Jackson, MS 39272
888-994-7636, fax 888-864-7636
groen.com
.ECNEREFER ERUTUF ROF DENIATER EB TSUM LAUNAM SIHT
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
POST IN A PROMINENT LOCATION
Instructions to be followed in the event user smells gas.
This information shall be obtained by consulting your
local gas supplier. As a minimum, turn off the gas and
call your gas company and your authorized service agent.
Evacuate all personnel from the area.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation, operating and main
tenance instructions
thoroughly before installing or servicing this equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt of
same and to determine the possibility of any damage, including concealed dam-
age. Unified Brands suggests that if you are suspicious of damage to make a
notation on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
PART NUMBER 160812, REV. E (11/08)

Other manuals for Groen Eclipse BPM-40G

Questions and Answers

  • A
    Anthony BeckerAug 8, 2025
    What to do if the burners won't light on my Groen Commercial Food Equipment?
    • P
      perkinssandraAug 9, 2025
      If the burners on your Groen Commercial Food Equipment won't light, ensure: * The main gas supply valve is open (handle is in line with the gas pipe). * The gas supply to the braising pan is at the specified pressure. * The pan body is horizontal. * The thermostat operates correctly, clicking when the dial is rotated to settings above and below the pan's temperature.
  • J
    Juan ValdezAug 14, 2025
    Why does my Groen Eclipse BPM-40G Commercial Food Equipment pan stop heating before reaching the desired temperature?
    • J
      Julia BeardAug 14, 2025
      If your Groen Commercial Food Equipment pan stops heating before reaching the desired temperature, check the thermostat dial setting and calibration. Also, verify the thermostat operation; it should click when the dial is rotated to settings above and below the desired temperature.
  • K
    Keith ReevesAug 21, 2025
    What to do if Groen Commercial Food Equipment pan continues to heat after reaching the desired temperature?
    • J
      jessica01Aug 21, 2025
      If your Groen Commercial Food Equipment pan continues to heat after reaching the desired temperature, check the thermostat dial setting and calibration. Also, verify the thermostat operation; it should click when the dial is rotated to settings above and below the temperature of the pan.
  • J
    Jennifer NewtonAug 27, 2025
    How to fix uneven heating in a Groen Eclipse BPM-40G pan?
    • M
      Michelle LevineAug 27, 2025
      To fix uneven heating in your Groen Commercial Food Equipment pan, ensure that the pan body is horizontal and that the pan is preheated properly, following the instructions in the Operation section of this manual. If the hi limit control has tripped, reset it and call your authorized service agency.
  • D
    dustin88Sep 2, 2025
    Why is the pan hard to tilt on my Groen Commercial Food Equipment?
    • K
      Karla WebbSep 2, 2025
      If the pan on your Groen Commercial Food Equipment is hard to tilt, the issue could be due to gears or foreign materials, lubrication problems, or alignment issues. It also may be caused by broken tilt or worm gears.

Summary

1. Installation

1.1 Installing Clearances

Specifies minimum and recommended distances for appliance installation.

1.2 Gas Supply

Details requirements for connecting the gas supply, meter, and pipework.

1.3 Electrical Supply

Outlines electrical connection requirements including voltage, phase, and wiring.

2. Assembly and Commissioning

2.3 Operating the Braising Pan

Details the lighting sequence, controls, and gas pressure setting.

3. Servicing and Conversion

3.1 Servicing

Procedures for gas soundness testing and regular maintenance.

3.2 Conversion

Steps and parts required to convert gas types or perform conversions.

4. User Instructions

4.1 Lighting and Operation

Guide on how to safely light and operate the braising pan.

4.5 Sequence of Operation

Describes the step-by-step process the unit follows during ignition and operation.

5. Cleaning

6. Safety Precautions

7. Maintenance

Troubleshooting

Groen Eclipse BPM-40G Specifications

General IconGeneral
ModelBPM-40G
Capacity40 gallons
MaterialStainless Steel
Heating MethodGas
TypeBraising Pan
Temperature Range100°F to 450°F

Related product manuals