- 27 -
Fig.5.2.8 S/N is serial number
Fig.5.2.9
Item Meaning Note
Value
Registered total energy
“E_all”
e.g.20000.0
Password Setting password Correction
Set State Set process OK is successful for setting
COM COM port address in PC Found in Device Manager
Inv Add Internal address of inverter
“Auto Inv Add” can be
selected if only one inverter
connected
Table 5.2.3 Meanings of E_all reset interface in ShineCorrection
11) Reset total energy “E_all” via ShineCorrection referring to Fig.5.2.9 and Table 5.2.3.
12) Turn on AC breaker and restart the inverter.
To Next Page
Loading...
