To Next PageTo Next Page
Need help?Do you have a question about the Growatt 1500-S and is the answer not in the manual?
Specifies that only qualified personnel should install and operate the inverter according to local regulations.
Emphasizes reading and following all safety instructions, cautions, and warnings for safe installation and operation.
Provides critical warnings regarding the physical assembly and installation of the inverter, including inspection and mounting.
Warns about lethal voltages, touching live components, and the need for qualified personnel for electrical connections.
Details warnings related to operating the inverter, such as hot surfaces, proper enclosure closure, and avoiding unauthorized access.
Outlines crucial safety precautions that must be followed before and during inverter installation to prevent injury or damage.
Guides installers on choosing an appropriate and safe location for mounting the inverter, considering environmental factors.
Details the process of physically mounting the inverter unit onto its designated bracket using provided hardware.
Explains the importance and method of connecting switches for safely isolating the inverter from the grid and PV arrays.
Provides essential information and requirements for proper grounding of the inverter system, especially for transformerless models.
Details safety, PV array connection, AC grid connection, and demand response modes for electrical setup.
Guides on setting inverter parameters like language, LCD contrast, communication address, and grid voltage.
Details communication methods like RS232 and optional WiFi for monitoring and controlling the inverter's performance.
Lists and explains warning codes (W) that indicate the current status of the inverter without it being a fault.
Identifies error codes (E) that signify equipment failure, faults, or incorrect settings, requiring qualified attention.
General