EasyManua.ls Logo

Growatt 1500 User Manual

Growatt 1500
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
service@ginverter.com
GR - UM - 001 - 07
GROWATT NEW ENERGY CO.,LTD
Question and Answer IconNeed help?

Do you have a question about the Growatt 1500 and is the answer not in the manual?

Growatt 1500 Specifications

General IconGeneral
Rated Power1500W
Number of MPP Trackers1
Nominal AC Voltage230V
Power Factor>0.99
THDi<3%
DC ConnectionMC4
AC ConnectionPlug
Protection DegreeIP65
TopologyTransformerless
WaveformPure Sine Wave
AC Voltage Range180V-280V
AC Grid Frequency50Hz/60Hz
Operating Temperature Range-25°C to +60°C
CoolingNatural Convection
Protection FeaturesDC Reverse Polarity Protection, Over Current Protection, Over Voltage Protection, Short circuit, Anti-Islanding Protection, Temperature Protection

Summary

INSTALLATION

Installation manual

Provides essential guidelines for safe and correct installation procedures.

Connect to the grid (AC utility)

Explains how to connect the inverter to the AC power supply.

Connect to PV panel (DC input)

Guides on connecting the photovoltaic panels to the inverter's DC input.

MODES OF OPERATION

Fault mode

Explains fault conditions and how the inverter responds.

INVERTER STATUS

COMMUNICATIONS

TROUBLE SHOOTING

SPECIFICATIONS

Country/Regulation Name

2.5 Checking

2.5.2 Commissioning

3 Modes of Operation

3.2 Fault mode

Inverter monitors status and displays information on LCD if faults occur.

Automatic ON-OFF:

Starting-up display sequence:

Inverter Status

5 Communication

Trouble Shooting

SYSTEM FAULT

Troubleshooting for system faults like ground fault and isolation fault.

Grid Fault

Procedure for resolving issues related to grid connection and stability.

No AC connection

Troubleshooting steps when there is no connection to the AC grid.

INVERTER FAILURE

Troubleshooting for inverter failures, including PV over voltage.

Consistent Fault

Steps to resolve consistent faults and errors.

7 Specifications

Input Data

Technical specifications for the input parameters of the inverter.

Output Data

Technical specifications for the output parameters of the inverter.

Related product manuals