EasyManua.ls Logo

Growatt INFINITY 2000 - How to Use; Basic Instruction

Growatt INFINITY 2000
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 7 -
HOW TO USE
BASIC INSTRUCTION
Before use, please put the INFINITY 2000 Expansion Battery on clean and flat ground to ensure that the machine will not be in
contact with liquid or tilted, and check whether there are foreign objects on the body.
Product ON/OFF
A) Short press the power button to turn on the INFINITY 2000 Expansion Battery.
B) Press and hold the power button for 3 seconds to shut down. You'll hear a prompt sound and see "OFF" displayed.
DC ON/OFF
C) Short press the DC power button to turn on the DC output ports (including car output, DC 5521 output, and Anderson output). You will
hear a "beep" and see the DC power indicator light on.
D) To turn off the DC output power, briefly press the DC power button and see that the DC power indicator light goes out. When the output
power of a single DC interface exceeds the following rated power, an overload alarm is triggered, the system will shut down, and the DC
output will be cut off.
The maximum power output of the car cigarette lighter and DC 5521 output port is 132W when used simultaneously.
The maximum output power of the Anderson output port is 396W.
USB ON/OFF
E) Short press the USB power button to turn on USB-A fast charge and USB-C with a prompt sound. Short press the USB power button
again to turn off the USB output.
F) The maximum output power of the USB-A fast charge port is 18W, and the maximum output power of the USB-C port is 100W. If the
rated power is exceeded, the system will send out an alarm signal.
Use after Long-Term Storage
G) If your portable power station has not been used for more than 3 months, it is recommended to discharge it until the battery level is 0%,
and then recharge it to 100% to avoid calibration errors after a long period of inactivity.

Related product manuals