12
3 Product description
3.1 MIC TL-X Overview
Position Description
A
Cover
B*
DC SWITCH
create a shock hazard; to minimize occurrence of such conditions,
comply with all corresponding safety symbols and markings present on
the unit and in this manual.
In special cases, there may still be interference for the specified
application area despite maintaining standardized emission limit values
(e.g. when sensitive equipment is located at the setup location or when
the setup location is near radio or television receivers).In this case, the
operator is obliged to take proper action to rectify the situation.
Do not stay closer than 20 cm to the inverter for any length of time.
To Next Page
Loading...
