2.1.2 Electrical hazards
● There is an immediate danger of fatal injury from electric
shock when touching live parts. Damage to the insulation or
individual components can be lethal.
● Only have qualified electricians carry out electrical work on
the product.
● In case of damage to live components, switch off the voltage
supply immediately and arrange for repair.
● Switch off the supply voltage before working on electrical sys-
tem parts. Discharge residual voltage.
● Never bridge electrical fuses. Do not disable fuses. Use the
correct current ratings when replacing fuses.
● Keep moisture away from live parts. Moisture can cause
short-circuits.
2.1.3 Groups of persons requiring protection
● This product is not designed to be used by persons (including
children) with reduced capabilities, lack of experience or lack
of knowledge.
To Next Page
Loading...
Need help?
General