2 Safety
2.1 Safety measures
● Only operate your product if all components are installed
properly.
● Obey the local regulations on drinking water protection, acci-
dent prevention and occupational safety.
● Do not make any changes, alterations, extensions or program
changes on your product.
● Only use genuine spare parts for maintenance or repair.
● Keep the premises locked against unauthorised access to
protect imperilled or untrained persons from residual risks.
● Comply with the maintenance intervals (refer to chapter 8.2).
Failure to comply can result in the microbiological contamina-
tion of your drinking water system.
2.1.1 Mechanical hazards
● You must never remove, bridge, or otherwise tamper with
safety equipment.
● Make sure that the product is securely fastened on the wall or
on the tank and that this is guaranteed at all times.
To Next Page
Loading...
Need help?
General