Maintenance and repair
45 | 64
BA_712940
-inter_175_GENO
-Multi Niveau.docx
8 Maintenance and repair
Maintenance and repair includes cleaning, inspection and mainte-
nance of the product.
The responsibility for inspection and maintenance is subject to local
and national requirements. The owner/operator/operating company
is responsible for compliance with the prescribed maintenance and
repair work.
By concluding a maintenance contract you make sure that all
maintenance work will be carried out on time.
► Only use genuine spare and wearing parts from Grünbeck.
8.1 Cleaning
Only have the cleaning work carried out by persons who have been
instructed in the risks and dangers that can arise from the product.
Do not clean the product with cleaning agents con-
taining alcohol/solvents
● These substances damage the plastic components
► Use a mild/pH-neutral soap solution.
► Only clean the outside of the product.
► Do not use any strong or abrasive cleaning agents.
► Wipe the surfaces with a damp cloth.
► Dry the surfaces with a cloth.
To Next Page
Loading...
Need help?
General