5.1 Requirements for the installation site
● The installation site must be frost-proof and ensure the
product's protection from direct sunlight, chemicals, dyes, sol-
vents and their vapours, etc.
● The installation site must be adequately illuminated and venti-
lated.
● The installation site must be easily accessible for mainte-
nance purposes.
● In case of wall mounting, the distance between the filling level
indicator and the level probe must not exceed max. 2.5 m due
to the allowable length of the cable.
● For the electrical connection, a Schuko socket (230 V/50 Hz)
is required within a range of approx. 1.6 m of the product.
To Next Page
Loading...
Need help?
General