3.3 Functional description
The filling level indicator GENO-Multi Niveau is designed to meas-
ure and display the filling level in permeate/pure water or raw water
tanks.
Membrane systems, pressure booster systems or pool water sys-
tems and make-up water feed systems can be controlled via pro-
grammable switching contacts.
Pressure measurement
By means of a level probe at the bottom of the tank, the pressure
generated by the water column is registered and emitted as a
4 – 20 mA signal.
The filling level indicator GENO-Multi Niveau converts the pressure
signal into a filling height (cm), a filling level (%) or a filling volume
(m³).
To Next Page
Loading...
Need help?
General