8.3 Inspection
You as owner/operator/operating company can do the regular in-
spections yourself.
► Carry out an inspection at least every 2 months.
1. Check whether a malfunction is shown in the display.
2. Visually check the connection point of the level probe for
leaks.
3. Check the display value of the filling level, if possible:
a Fill the volume in the tank up to level a with known flow
(make-up feed).
b Compare the make-up volume with the previous filling
level.
Minor deviations are normal and cannot be prevented technically.
► In the event of major deviations from the standard, contact
the technical service.
To Next Page
Loading...
Need help?
General